gorsegner brothers hardwood floors flooring floor sanding installation sales service staining

~ HARDWOOD FLOOR INSTALLATION ~ SALES ~ SERVICE ~ REPAIR ~ STAINING ~ DUST FREE SANDING ~

gorsegner brothers hardwood floors flooring floor sanding installation gorsegner brothers hardwood floors flooring floor sanding installation gorsegner brothers hardwood floors flooring floor sanding installation gorsegner brothers hardwood floors flooring floor sanding installation gorsegner brothers hardwood floors flooring floor sanding installation gorsegner brothers hardwood floors flooring floor sanding installation
gorsegner brothers hardwood floors flooring floor sanding installation sales service staining
Free Hardwood Floor Quote Click Here

 

gorsegner brothers hardwood floors flooring floor sanding installation sales service stainingThe Finishing Touch!

Hardening – The hardening process or crosslinking process takes approximately 21 days.
The floor may be walked on after 12–14 hours—but the floor is susceptible to scuffing or marring when moving furniture prior to the completion of the hardening process.
Carpets or rugs should NEVER be placed on the floor for at least 3 weeks after refinishing.


Prevention Tips

In order to keep its beauty and enjoy a great looking floor longer, a few requirements must begorsegner brothers hardwood floors flooring floor sanding installation sales service staining met. Observing them will save you a lot of hassle.

Regularly sweep or vacuum a floor to prevent sand or abrasive dust from accumulating and scratching the finish. (Sand and water are wood’s worst enemies.)

Place doormats outside and rugs inside every entrance of the house to prevent sand and abrasive dust from accumulating on the floor.

Avoid interior rugs that are tightly woven or that have a rubber underside. They prevent proper air circulation.

Place a rug in front of the kitchen sink and dishwasher to protect the floor from dropped items and from water or oil spills.

Use adequate floor protection (felt pads) under all furniture and chair legs in order to ease their movements and to prevent scratching the floor. (Make sure to use specially designed commercial protectors. Keep them clean and in perfect condition.)

Use protectors under all narrow casters or replace them with rubber casters (avoid plastic casters.)

gorsegner brothers hardwood floors flooring floor sanding installation sales service stainingProtect the floor when moving heavy pieces of furniture. Carry them or place them on a rug, wrong side up, and slide the rug. (Refrigerators should never be moved without adequate floor protection.)

The relative humidity level in your home must be maintained at 45% (i.e. 40—50%) throughout the year.

Hardwood is a living substance, which reacts to changes in relative humidity. It absorbs or releases humidity according to the seasons. Consequently, its dimensions change.

In summer, when humidity is at its highest, it is absorbed by the wood which then expands. This expansion causes the strips of wood to push against one another. The floor is cupped or ‘cupping.’ These variations can be minimized with proper heating, ventilation, a dehumidifier.

In winter, on the other hand, when the heating system is on, relative humidity in the house is much lower. The wood releases its humidity and consequently shrinks. Small gaps appear between the wood strips. It is then suggested to use a humidifier in order to minimize the extreme shrinkage effects. (Wood burning stoves and electric heating systems have a tendency of creating an extremely dry environment.)

Keep “high heel” shoes in good condition. Damaged or worn heels may expose the metal tip,gorsegner brothers hardwood floors flooring floor sanding installation sales service staining which will certainly damage your hardwood floor. Some types of sports shoes may also damage the surface of your floor.

Keep your pets’ nails well groomed in order to prevent them from scratching the surface of the floor.

Protect your floor against direct sunlight or any source of intense artificial lighting. Over time, intense light will discolor exposed surfaces. To minimize the contrast created by the absence of light under carpets and furniture, as compared with the rest of the floor, we recommend that carpets and furniture be moved from time to time and that sources of intense light be reduced.


THINGS TO AVOID:

Do not use any of the following products or similar products:
Fantastic
Formula 409
Dishwashing Detergent
Powdered All-Purpose Cleaners
Murphy’s Oil Soap
Paste Wax
Endust, Pledge or other Dusting Products
Future, Mop ‘N Glow, or Other Floor Polishes

RECOMMENDED PRODUCTS:
For Cleaning and Maintenance Use POLY CARE Cleaner
No Soap Build Up
Rinse-Free Formula
Biodegradable & Phosphate Free
Safe for All Polyurethane Finishes
Use for Any Wood Surface—Cabinets, Counters, Handrails, etc.

OR

BONA KEMI SPRAY Cleaner
No-Mix Formula—Use Straight from Spray Bottle
Environmentally Friendly
Chemicals Designed to Tackle Twice the Spills
Cleans both Grease and Protein Spills

FOR ALL TOUGH SCUFFS AND SPILLS

POLY CARE SCUFF
Cleans Tough Scuffs in Just 3 Minutes
Fresh Citrus Scent


Call or fax your orders to be picked up or mailed to you!
Free Hardwood Floor Quote Click Here
/ HISTORY / PRODUCTS / SERVICES / GALLERY / FREE QUOTE / CARE GUIDE / CONTACT / HOME /

~ GORSEGNER BROTHERS HARDWOOD FLOORS ~ HWY. 36 ~ MIDDLETOWN, N.J. ~ 
Middletown Location:  732-291-SAND (7263) ~ Fax 732-291-7619
Rutherford Area:  201-933-SAND (7263)

top